The New Generation of coolers is suitable for the cooling of all kinds of pellet feed. Pellet Cooler,Counter Flow Cooler,Prevent Surface Cracking,Feed Counter Flow Cooler XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.feedmill.nl
The temperature and moisture of pellets after pelletizing is too higher, can not pack the bags directly. so, we need use cooler to down it.
The principle of Counter-flow cooler is used to cool the pellets of high temperature and high humidity, and the materials are gradually cooled down from bottom to top, so as to avoid the phenomenon of quench caused by the direct contact between cold air and hot materials, so that feed can Prevent Surface Cracking.
Common instruments used in mine surveying are:
I. Level: The level is used to measure the height difference between the ground points. Commonly used models are DS 05 , DS 1 , DS 2 , DS 3 , DS 10 , DS 20 and so on.
2. Theodolite: The theodolite is an instrument used to measure the angle between measuring points. Commonly used models are DJ 07 , DJ 1 , DJ 2 , DJ 6 , D 15 and so on.
3. Range finder: The telescope on the theodolite and the level gauge has a line of sight device. With the line of sight wire and the line of sight being late, the line of sight can be measured. Special equipment also has an electromagnetic wave range finder. Electromagnetic wave range finder includes laser, infrared photoelectric distance finder, and microwave range finder with centimeter wave carrier. Commonly used infrared range finder, models are PCH-05, D 14 , D 14L , D 15S , D M503 and so on.
Fourth, in the actual measurement, it is also necessary to equip the tripod, the drawing board, the weight, the accumulator, the tower ruler, the tape measure, the squat mark and other equipment.