Brief introduction, small dump truck refers to a small vehicle that can automatically load and unload cargo. In general, the operating rules for small dump trucks include three elements. What is the specific work of these three parts? Today, Xiaobian will explain it to everyone. I believe that by reading the following, we will have a more comprehensive understanding of this knowledge. First: Don't suddenly press the lifting handle during the loading process When we operate small dump trucks , we must pay special attention to the fact that during the rising of the cargo loading, we must not suddenly press the lifting handle while pushing the handle to the landing position. Because if you accidentally operate this wrong thing, it will make the car suddenly landed quickly, resulting in a very large impact on the frame, followed by a serious accident. Therefore, in our daily life, if we need to land in special circumstances, we must slow down at a constant rate to ensure that the carriage can land slowly. Second: Do not drastically lift the car to brake offloading Everyone should know that the inertia of the car is very large, so if the car is suddenly braked, it may cause the frame of the small dumper to bend. At the same time, the seal may be damaged and the hydraulic cylinder may be damaged to a certain extent. Even more serious is that doing so will shorten the use time of small dump trucks and cause a dangerous accident of rollover. Third: The PTO must be released after the unloading is completed If we operate the vehicle directly after the small dump truck has been used to load and unload cargo, this will cause the oil pump seal to be damaged, and at the same time it will cause damage to the hydraulic systems, which will cause the carriage to rise automatically. This is because, if we drive directly after loading and unloading, the power take-off device is still in a connected state. This state will cause serious consequences such as the burning of a series of oil pumps. At the same time, when the power take-off is in the engaged state, it will show a red light. At this time, the oil pump will continue to rotate, which will cause the carriage to slowly rise, and then burn the pump again, causing even more serious accidents. The above are the three major operating rules for small dump trucks that Xiao Bian has summarized for everyone. Every point is very important. If you do not pay attention to it, it will lead to a variety of accidents and even endanger the lives of drivers and surrounding people. Therefore, if someone around you is driving a small dumper, be sure to share it with them. Others Series Products
11.Die Casting Machine Capacity from 50 tons to 3000 tons.
Other Series Products Aluminium Die Casting Accessories,Mould Part Series Products,Die Casting Lamp Part,Alloy Die Casting Series Products Ningbo Bowei Mould Metal Products Co., Ltd , http://www.bwmoulds.com
1.High Quality Die Casting Production series products.
2.Cast aluminum die cast parts in many Aluminum Die Casting for Auto Parts, Aluminium Die Casting for Communications, Lamp Part Series , Water Pump Part Series, Power Tool Series , radiator part series, anti-static flooring products and Other Series Products.
3.Die casting consulting for Aluminum Die Casting part design and die casting tooling.
4.High quality surface on your aluminum die casting products.
5.Close dimensional tolerances on products die casted in aluminum.
6.Production on aluminum die cast parts will begin in less than two weeks typically..
7.Competitively priced aluminum diecast parts.
8.Various sizes and types of aluminum diecasting capabilities for your needs.
9.A360, A380, A383 and A413, and all Aluminum Die Cast Alloy Parts comply with the EU RoHS standards.
10.Aluminum Sand Casting Parts to Aluminum Die Casting Part conversions.
