Pneumatic punching the correct method of operation:

A punch press must go through the study, master the structure of the device, performance, familiar with the operating procedures and obtain permission to operate independently.

2 Proper use of equipment on the safety protection and control devices, shall not arbitrarily move

3 Check the machine transmission, connection, lubrication and other parts and protective fuse is normal, the mold screw must be installed firmly, not moving.

4 The machine tool should be left open for 2-3 minutes before work. Check the flexibility of the control device such as foot brake to confirm the normal operation before use.

5 Mold tight solid, the upper and lower mold alignment, to ensure the correct position, hand-moving machine test impulse to ensure that the mold is in good working condition.

6 before starting to pay attention to lubrication, remove all floating objects on the machine surface

7 Punch or running punching operation, the operator should stand properly, hands and head should keep a certain distance with the punch, and always pay attention to punch action.

8 Chong short workpiece, the use of special tools, shall not be directly by hand feeding or picking.

9 Punching long body parts should be set up safety care rack or take other safety measures to avoid damage.

10 single red, hands, feet are not allowed on the hand, foot gate, must be washed once moved to prevent accidents

11 When two or more people work together, the person responsible for moving (riding) gates must pay attention to the action of the feeder, and it is strictly forbidden to take a copy while moving the gate.

12 work at the end of timely parking, cut off the power, wipe the machine, finishing the environment.

【Print】 【Close】

Titanium Tube Machining Parts

Titanium Tube Machining Parts,Titanium Smoking Nails,Heat Resistant Exhaust Titanium Pipe,Light Weight Titanium Exhaust Pipe

Unidus Cooperation (HK) Limited , https://www.unidusmetal.com

Posted on