Recently, Kongsberg Maritime obtained the type approval (WheelMark certification) of the MGC R3 MGC R3 gyrocompass by the International Maritime Organization (IMO). The gyrocompass is ideally suited for the range of navigation and ship control systems offered by Kongsberg Maritime. It is reported that the MGC R3 Gyro Compass integrates the Motion Reference Unit (MRU) platform with high-end gyrocompass that has been withdrawn from Kongsberg Maritime, and will provide a reliable and accurate solution for any navigation. It can be used as a gyrocompass or as a gyrocompass for a full inertial navigation system to provide heading, roll, pitch, heave and position data. This data will be sent over Ethernet and serial lines to ensure efficient distribution to multiple users on board. PP Composite Cap For Plastic Infusion Container
The polypropylene composite cap for plastic infusion container comprises of the pullâ€tab outer cap, inner cap, and synthetic medicalâ€level polyisoprene cushion; among which, the materials for the inner cap and outer cap are the imported medicalâ€level polypropylene, complying with the FDA rules and passing the USP CLASS VI test; the synthetic medicalâ€level polyisoprene cushion can be made from the imported product on the request of user. The inner cap of the composite cap will contact with liquid medicine directly to ensure the quality; whereas the cushion will be helpful to prevent penetration and seal whilst infusing the liquid medicine, and the outer cap plays a role to prevent bacterium.
The composite cap is produced in the clean plant, with the overall plant reaching to Class 10,000 and some for Class 1,000,000. The main working procedures, such as the injection molding, inspection, cleaning, assembly and inner packing and so on, are designed and processed as per the
cleanliness requirements at the partial level of Class 100, which passes the GMP onâ€site certification and complies with the cleanliness
requirements of high capacity injection medicine.
The facilities involved by production, test and inspection of composite cap are available, with strict control and management to be conducted in the whole process of production, free of plasticizing agent, loading agent and lubricating agent, and free of absorption or transfer when contacting with liquid medicine, neither the pyrogen and soluble matter, thence such facilities may ensure the product quality.
The polypropylene composite cap for plastic infusion container is mainly used for nonâ€PVC softâ€bag infusion and polypropylene plastic bottle infusion.
Pp Cap,Plastic Cap For Infusion Container,Pp Cap For Plastic Infusion Container,Caps For Infusion Containers YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com