Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength. As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components. Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles. Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength. As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components. Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles.
Batch Type Oil Distillation Plant
The Waste Engine Oil Distillation Plant is used to refine waste engine oil, crude oil and fuel oil after pyrolysis process into diesel grade oil, gasoline or and base oil. The daily capacity of this plant is about 5-6 tons.
Flow-chat of waste engine oi Distillation Plant
Advantage of waste engine oi distillation plant
1. Unique and original manufacturing and technology with our own formula of our equipments in China;
2. Unique horizontal design, high oil output with about 90% oil yield and 100% conversion rate, highly effective and profitable;
3. Good quality end product oil as the substitution of standard diesel oil in usage;
Automatic submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices;
4. Sync gas recycling system: fully burned after recycling and utilization, saving fuel and preventing pollution;
5. National patent, unique heat insulation shell: high efficiency temperature keeping, excellent energy-saving effect;
6. High condensing efficiency condensers with more oil output. Good quality oil, longer lifetime, and easy to clean;
7. National patent water film smoke scrubbers: efficient removal of the acid gas and dust of the smoke, environmental friendly to meet related national standards.
Technical Parameter of Waste engine Oil Distillation Plant
NO.
Item
Technical Parameter
1
Suitable Raw Materials
Waste engine oil, Pyrolysis fuel oil, crude oil
2
Structure
Horizontal Type
3
Capacity(24 hours)
3.5-6.5Mt
4
Work Pressure
Normal Pressure
5
Oil Yield
80%-90%
6
Power
18 kw/H
7
Cooling Method
Cycle water
8
Condensers
4 pieces of Vertical condensers
9
Emission Treatment
New DE-sulfurization Smoke Scrubbers
10
Heating Method
Hot Air
11
Type of Installation
With Foundation
12
Noise dB(A)
≤85
13
Dimension of Reactor(mm)
Ф2200×6000
Ф2500×8800
14
Operating Mode
Semi-continuous Operation
15
Main Chamber Weight (MT)
10~13Mt
16
Total Weight(MT)
25~35Mt
17
Installation Space Required
35m*15m
18
End Product
Non-standard diesel oil
19
Manpower
1~2/shift
20
Shipment Requirement
2*40HC=Ф2200×6000
1*40HC+1*40FR=Ф2500×8800
Batch Type Oil Distillation Plant Batch Type Oil Distillation Plant,Batch Distillation Column,Waste Oil To Diesel,Oil Distillation Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nlElevator Chain
Bucket Elevator Chain
Bucket Lifter Chain
Chain type includes NE series, NSE series, NP series, and so on.Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin b2 (mm)
Inner width of inner link b1(min) (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attached plate h2 (mm)
Tensile strength Q (min.)(KN)
NE model lifting chain for elevators
NE15-101.6
101.6
26.5
11.5
70
27
6
35
35
128.1
NE30-152.4
152.4
35
15.5
90
36.5
8
50
50
245
NE50-152.4
152.4
35
15.5
90
36.5
8
50
110
245
NE100-200
200
42
19.1
120
51.8
10
60
125
375
NE150-200
200
48.5
22.23
120
57.8
10
60
125
375
NE300-250
250
70
35
165
75
16
100
150
450
NE300-250A
250
63.5
31.75
146
67.4
12
90
150
450
NP152.4
152.4
357
15.88
88
38
7.9
45
105
245
FE12600
152.4
35
15.88
86
36.5
7.9
45
120
245
NE100/2L
200
44.5
19.05
114
53
10
60
125
400
NE150-B/2L
200
44.5
19.05
114
53
10
60
125
400
NE200/2L
250
63.5
31.75
140
67.4
12
90
150
750
9060 G4/4L
152.4
34.93
19.05
94.5
38.1
9.5
50.8
120
312
P152.4-A/2L
152.4
36
17.33
85
36.5
8
50
105
160
DK 19200M G4/2L
200
38.1
15.77
86
36.5
8
45
125
312
NE150-A/2L
200
48.5
22.23
122
57.6
10
75
125
529
P152.4 3L
152.4
31.75
15.77
109
54
9.6
38.1
139.7
145
P125/2L
125
52
17
80
31
8
580
100
219.52
FE12600-S/2L
152.4
34.93
15.88
86
36.5
7.9
45
120
160
NE150/2L
200
48.5
22.23
118
57.6
10
75
125
529
NE300-250/2L
250
70
35
165
75
16
100
150
1107
P152.4/2L
152.4
35.7
15.88
88
38
7.9
45
105
160
DS17200-S G4/2L
200
40.08
19.05
106.5
50.8
9.5
50.8
130
260
P250-G4/2L
250
73
38.5
183.5
82
16
115
180
1200
NE300
250
70
35
165
75
16
100
150
1107
Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin L (mm)
Inner width of inner link b1 (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attachment h2 (mm)
Tensile strength Q (min.)(KN)
NP150
150
31.8
14.17
69
30
6.35
38.1
105
200
NP228.6
228.6
62
24.2
136
64
13
70
70
440
Chain No.
Pitch P (mm)
Inner width of inner link W (mm)
Diameter of roller D (mm)
Sidebar
Pin
Dimension of attachment
Tensile strength(KN)
Height H (mm)
Thickness T (mm)
Diameter d (mm)
Length L (mm)
H2 (mm)
N (mm)
X (mm)
Y (mm)
NSE200
100
51.8
44.5
60
10
19.1
111.5
150
18
100
105
420
NSE300
100
57.6
48.5
75
7.5
22.23
120
150
18
100
105
520
NSE400
125
67.4
63.5
90
12
31.75
139.3
180
18
125
130
735
NSE500-1
125
75
70
100
16
35
170
180
18
125
130
980
NSE500-2
125
75
71.5
102
16
36
165
180
18
125
130
1200
NSE600H
125
75
75
105
16
40
165
185
18
125
136
1260
NSE700
150
85
85
125
16
48
180
226
22
150
165
1470
Why Choose DCC?Â
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.More than 10years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
wish we will promote business as well as friendship!
Â
Elevator Chain
Bucket Elevator Chain
Bucket Lifter Chain
Chain type includes NE series, NSE series, NP series, and so on.Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin b2 (mm)
Inner width of inner link b1(min) (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attached plate h2 (mm)
Tensile strength Q (min.)(KN)
NE model lifting chain for elevators
NE15-101.6
101.6
26.5
11.5
70
27
6
35
35
128.1
NE30-152.4
152.4
35
15.5
90
36.5
8
50
50
245
NE50-152.4
152.4
35
15.5
90
36.5
8
50
110
245
NE100-200
200
42
19.1
120
51.8
10
60
125
375
NE150-200
200
48.5
22.23
120
57.8
10
60
125
375
NE300-250
250
70
35
165
75
16
100
150
450
NE300-250A
250
63.5
31.75
146
67.4
12
90
150
450
NP152.4
152.4
357
15.88
88
38
7.9
45
105
245
FE12600
152.4
35
15.88
86
36.5
7.9
45
120
245
NE100/2L
200
44.5
19.05
114
53
10
60
125
400
NE150-B/2L
200
44.5
19.05
114
53
10
60
125
400
NE200/2L
250
63.5
31.75
140
67.4
12
90
150
750
9060 G4/4L
152.4
34.93
19.05
94.5
38.1
9.5
50.8
120
312
P152.4-A/2L
152.4
36
17.33
85
36.5
8
50
105
160
DK 19200M G4/2L
200
38.1
15.77
86
36.5
8
45
125
312
NE150-A/2L
200
48.5
22.23
122
57.6
10
75
125
529
P152.4 3L
152.4
31.75
15.77
109
54
9.6
38.1
139.7
145
P125/2L
125
52
17
80
31
8
580
100
219.52
FE12600-S/2L
152.4
34.93
15.88
86
36.5
7.9
45
120
160
NE150/2L
200
48.5
22.23
118
57.6
10
75
125
529
NE300-250/2L
250
70
35
165
75
16
100
150
1107
P152.4/2L
152.4
35.7
15.88
88
38
7.9
45
105
160
DS17200-S G4/2L
200
40.08
19.05
106.5
50.8
9.5
50.8
130
260
P250-G4/2L
250
73
38.5
183.5
82
16
115
180
1200
NE300
250
70
35
165
75
16
100
150
1107
Â
Chain No.
Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin L (mm)
Inner width of inner link b1 (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attachment h2 (mm)
Tensile strength Q (min.)(KN)
NP150
150
31.8
14.17
69
30
6.35
38.1
105
200
NP228.6
228.6
62
24.2
136
64
13
70
70
440
Chain No.
Pitch P (mm)
Inner width of inner link W (mm)
Diameter of roller D (mm)
Sidebar
Pin
Dimension of attachment
Tensile strength(KN)
Height H (mm)
Thickness T (mm)
Diameter d (mm)
Length L (mm)
H2 (mm)
N (mm)
X (mm)
Y (mm)
NSE200
100
51.8
44.5
60
10
19.1
111.5
150
18
100
105
420
NSE300
100
57.6
48.5
75
7.5
22.23
120
150
18
100
105
520
NSE400
125
67.4
63.5
90
12
31.75
139.3
180
18
125
130
735
NSE500-1
125
75
70
100
16
35
170
180
18
125
130
980
NSE500-2
125
75
71.5
102
16
36
165
180
18
125
130
1200
NSE600H
125
75
75
105
16
40
165
185
18
125
136
1260
NSE700
150
85
85
125
16
48
180
226
22
150
165
1470
Why Choose DCC?Â
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.More than 10years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
wish we will promote business as well as friendship!
Â
Model NO.: NE model lifting chain for elevators
Samples: Free
Standards: Produce According to Approved Drawing
Structure (for Chain): Roller Chain
Trademark: DCC
Specification: ISO, SGS
Origin: Changzhou, Jiangsu, China
HS Code: 731589
Model NO.: NE model lifting chain for elevators
Samples: Free
Standards: Produce According to Approved Drawing
Structure (for Chain): Roller Chain
Trademark: DCC
Specification: ISO, SGS
Origin: Changzhou, Jiangsu, China
HS Code: 731589