Piston Pin Clip,Piston Wrist Pin,Floating Wrist Pin,Engine Piston Pin KINCON POWER TECHNOLOGY CO.,LTD , https://www.kinconparts.com
The rubber mixing mill with stock blender is extensively used in rubber products manufacturing factories to achieve the best mixing and dispersion of ingredients and raw rubber. When combined with a stock blender, these mills reduce labor requirements and increase productivity.
This machine is ideal for mixing and kneading raw rubber, synthetic rubber, thermoplastics, or E.V.A. along with chemicals to produce even materials. These materials can then be fed into calenders, hot presses, or other processing machines for the production of rubber or plastic products. The machine features a dual output reducer, allowing the front and rear rollers to be driven separately using a rolling bearing structure. The rollers can be either hollow center groove rollers or drilling hole smooth rollers, depending on the application—mixing, refining, or pressing pieces.
The machine can be equipped with a stock blender upon customer request, reducing manual effort and enhancing efficiency. It also includes safety devices for secure operation.
Our Machine Advantage:
Rolls are made from chilled cast iron with vanadium and titanium alloys, providing high hardness and wear resistance. To regulate temperature, the rolls are either circumferentially drilled or centrally bored, ensuring uniform heat distribution across the roll surface.
The machine is equipped with a hydraulic relief device that stops the machine immediately in case of an emergency, ensuring safety and reliability.
An electric nip regulating device makes operation user-friendly.
Roll bearings are double-row ball bearings, offering ease of maintenance and a long service life.
The transmission system uses a hard-faced gear reducer, which provides a compact design, higher efficiency, lower noise, and longer durability.
Main Technical Parameters:
Model
XK-660
XK-550B
XK-450
XK-400
XK-250
(D/L) Roll Size
660×2130
550×1530
450×1200
400×1000
250×620
Production
160~170Kg/once
50~60Kg/once
30~50Kg/once
25~35Kg/once
10~15Kg/once
Motor Power(KW)
220KW
90/110KW
55KW
45/37KW
18.5KW
Line Speed(M/Min)
34.2M
28.6M
21.8M
19.3M
15.5M
Front Roll RPM
16.5
16
15.4
15.4
19.8
Gear Ratio
47/Dual Output
47.5/Dual Output
50
50
50
Roll Ratio
1: 1.24
1: 1.22
1: 1.27
1: 1.27
1: 1.10
Weight (KG)
49800
18500/25000
11800
7500
3300
Temp. Control
Steam/Cool water
Emergency Stop
Two foot steps on four sets of press buttons
Container Volume
55.5m³
23m³
16m³
12m³
10m³
Dimension (L*W*H) mm
6200×3350×2670
5365×1946×2193
4558×1665×2015
4001×1500×1870
3220×1500×1290
Transmission
Low noise gear box
FQA - Problems of Customer Concern:
About Machine Performance Quality
1. Q: How to guarantee the quality of outsourcing parts?
A: We select more than two suppliers through tendering and have strict inspection systems and processes for all outsourced parts. Qualified goods are labeled and stored after inspection; unqualified ones are returned.
2. Q: Which brand of electrical parts do you use?
A: We use world-famous brands such as Siemens, Omron, Toshiba, Schneider, and ABB. Customers can specify the brand if needed.
3. Q: How do you control the quality?
A: There are inspectors who check equipment quality and performance. After assembly, the machine runs continuously for at least 12 hours, with a total running time of no less than 48 hours.
About Installation
1. Q: When will the guide engineer arrive at the customer's factory?
A: If on-site installation is required, the engineer will arrive within one week after the machine has reached the factory.
About After-Sales Service
1. Q: What is the warranty period?
A: Two years after the machine arrives at the factory.
2. Q: How do you solve problems?
A: Within one hour of receiving a customer’s problem, we inform them of the solution. There are three ways to address different situations: 1. Problems solvable by phone or email will be resolved within two hours. 2. Problems solvable via remote control will be addressed within four hours (the machine is equipped with remote network control). 3. On-site issues will be handled by an engineer arriving within one week (within the two-year warranty period, engineers can visit the country where the machine is located anytime).
Machine Assembly at Factory:
Machine Details:
Foreign Customers Visit Our Factory:
Exporting Loading Container:
Model NO.: XK
Packaging: Wood Carton
Brand: Maoyuanfeng
Electronics: World Famous Brand
Warranty: One Year
Trademark: MYF
Transport Package: Wood Carton
Origin: China
Model NO.: XK
Packaging: Wood Carton
Brand: Maoyuanfeng
Electronics: World Famous Brand
Warranty: One Year
Trademark: MYF
Transport Package: Wood Carton
Origin: China
Product Profile: