Wire And Nails,Round Wire Nails,Wire Coil Nails,Wire Weld Nails ANPING COUNTY YEXIANG HARDWARE WIREMESH PRODUCTS CO.,LTD , https://www.yexiangwiremesh.com
LED explosion-proof lights use LED light source, ordinary explosion-proof lights do not necessarily use LED light source, in both the same power, LED explosion-proof lamp brightness than ordinary explosion-proof lights to bright. Moreover, LED lights are originally semiconductor lighting, explosion-proof level is higher than the average.
Therefore, LED energy-saving lamps can save energy by 40% compared with ordinary light sources, and explosion-proof grades are better than ordinary light sources. Sealing performance is also better than ordinary explosion-proof lamps. So many customers want to buy LED explosion-proof lights, but the price of LED explosion-proof lamps is more expensive than ordinary. Some factories will still choose ordinary light sources, after all, they are more convenient to install, just change the bulb. The LED explosion-proof light is different, the installation is more complicated, is a complex installation of lamps.
LED explosion-proof lamps have poor heat dissipation capability. The main reason is that the temperature inside the chip is longer with the light, and the heat energy inside does not go out. The general explosion-proof lamp has better heat dissipation than the LED explosion-proof lamp, mainly because the internal temperature is not so high.
In particular, high-power LED explosion-proof lights can be too poor, and the temperature inside is too high. This lamp is mainly the internal heat energy can not be dispersed. For example, 200W for many people, please contact the technical department of Yueqing Yuehong Electrical Co., Ltd. Wugong technical parameters:
Explosion-proof mark: ExdembIICT4
Working voltage: AC220V50Hz
Light Source: 100-140W Puri LED 200W Cree LED
Rated power: 100/120/140/200W
Light source color temperature: warm white 2700~4500K/normal white 5000~6500K
Power factor: 0.98
LED luminous flux: 10000 to 20000Lm
Protection class: IP66
Anti-corrosion level: WF2
Introduction device: G3/4' inlet size, suitable Φ10mm～Φ14mm Cable installation method: ceiling type, wall type, embedded type, street lamp type Weight: 13kg
Dimensions: 478 × 306 × 166mm
Product brand: CHYH
Manufacturer: Yueqing Yihong Electric Co., Ltd. Quality Assurance:
In strict accordance with ISO9001:2008 international quality management system standards for quality control, to ensure that product quality is higher than the national standard, fully meet the design requirements, the product is implemented for three years warranty, within three years from the date of purchase, the product under normal use of any failure from the The company is responsible for free maintenance.
What is the difference between LED explosion-proof light and ordinary light source?