Aluminum Die Casting Auto Parts/Car Parts is a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum Die Casting Auto Parts/Car Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
Aluminum Die Casting Auto Parts/Car Parts is efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die cast, because the process provides very close tolerances for even complex shapes. Aluminum die castings can also be easily plated or finished. Aluminum die castings are dimensionally stable and heat resistant
Aluminum Casting Auto Parts, Aluminum Die Casting Parts, Aluminium Auto Parts Ningbo Zhenhai Xinxie Machinery Co.LTD , https://www.xinxie-diecasting.com
It is a volumetric rotary piston water meter for residentialÂ
application in sizes 15mm-40mm for cold meter.
Features
Compact piston design, low starting flow rate(<4L/h)
Higher measuring range, up to Q3/Q1:500
Sealed dry dial register ensures clear reading
Magnetic drive mchanism with anti-magnetic protection
Plastic meter body and plastic ring
Install position: H/V
Standards ComplianceÂ
Directive 2004/22/EC on measuring instruments;Â
the European  Standard EN14154+A1+A2: Water Meter;Â
the International  Organization of Legal Metrology OIML R-49: 2006(E)
Optional FeaturesÂ
Several lengths and connections available on request
Non return Valve
Reed switch option
Working Conditions
Water temperature: ≤50ºC for cold water meter Â
Water pressure:   ≤1MPa or 1.6MPa optional
                 (10bar or 16bar option)
Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.
Installation requirements
The meter should be installed in horizontal/vertical position with the direction of the flow as indicated by the arrow cast in the meter body with the register face upwards. Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.
Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
 
Model NO.: PD-BP
Principle: Volumetric Meter
Medium Pressure: General Water Meter
Work Environment: Wet Water Meter
Stucture: Traditional
Material: Plastic
Type: Volumetric Rotary Piston Type
Size: 15mm-50mm
Temperature: 0 Degrees Celsius to 50 Degrees Celsius
Working Pressure: 16 Bar
Dial Reading: 0.02L to 99999 Cubic Meter
Pressure Loss: 63
Connecting Standard: Bsp & NPT
Trademark: Aimei
Specification: Export Standard
Origin: China
HS Code: 9028201000
Volumetric Rotary Piston Water Meter