In many cases, many people will find that some cities are messy because of the lack of a lot of sprinklers. And even if there is a sprinkler, the sprinkler is an ordinary sprinkler in the past. In the process of cleaning and renovating the construction site and the urban environment, it is also very inexperienced, and the background performance of various aspects is not in place. Therefore, the arrival of the 10 party sprinkler can be considered a great savior. The next step is to talk about how to effectively use the 10-party sprinkler to manage urban pollution, and what details to pay attention to during the subsequent maintenance and maintenance. First of all, from the first point of view, the old ordinary dust-removing vehicles unilaterally cleared the roads of urban roads, and there were blind spots and dead ends in the process of clean-up. There were also many places that were not in place. The 10-square-sprayer can not only clean the road and all aspects of the environment, but is also 360-degree dead in the process of clean-up, and it can also realize large-scale water transport and clean-up of railway traffic, and it can also achieve Watering and flower beds are cleaned of dirt. The equipment of the 10 square sprinkler is very scientific and technologically advanced. Electronic remote control technology and intelligent mechanical technology are adopted. Mechatronics technology is well used to realize information interaction and platform architecture. Electronic control. Therefore, only one person is enough to control the whole process. The hardware of the 10-way sprinkler is mobile, and it is also very portable. The floor space is very small. When the liquid is poured into the container, the liquid will reach the injection point. When serving the railway traffic, the photoelectric detection system of the 10-way sprinkler will output an effective frequency. In this process, the train's cabin and the liquid system of the 10-way sprinkler will form an effective orthogonal effect. Moreover, the intelligent system also started to work. Therefore, when the railway traffic receives the orthogonal signal from the 10-party sprinkler , the carriage and the sprinkler of the train form a liquid-phase orthogonality. At this time, the sprinkler spray points form an automatic spray during the spraying process. It is possible to spray too much mist and spray water. So this will be regulated according to specific conditions, and it is also very flexible. During the process of spraying the dry environment, the smart eyes of the sprinkler can effectively identify the degree of dryness of the road surface, so that the first spray squirt mist too much water to wet the road surface. In this case, disc brushes are avoided at the later stage. The process of cleaning during rolling causes the dust to be diffused into the air for the second time, which effectively circumvents the pollution to the environment and air. In addition, the use of the water in the fog water can also greatly reduce the waste of water resources, and it is also in line with the environmental protection indicators. The Swage Standoffs is supplied in Nickel Plated
Manufactured with shank lengths that can accommodate panel thicknesses from .062 [1,57] to .125 [3.18] thick.We use the Swage Standoffs material is stainlee steel ,brass ,aluminum,and steel.
If you need ,you can give us drawing or sample,we will as soon as possible finishing it .
Swage Standoffs Swage Standoffs,Customized Swage Standoffs,Carbon Steel Swage Standoffs,Electrical Swage Standoffs Shenzhen Long Wei Wang Precision Technology Co., Ltd. , https://www.electronichdwe.com
Available in Round and Hex Configurations,avaialble in 2-56, 4-40 and 6-32 Threads