Now, in order to keep the city clean, after cleaning the rubbish, the workers are transported to a remote place using a clearing vehicle. Therefore, it is common for urban garbage trucks to remove rubbish. For consumers, in order to ensure that your vehicle can be used for a long time, you need to understand what are the common breakdowns of some garbage trucks . Then we will give you a detailed description of what are the common faults. First, the adjustment of the vehicle's toe-in, first of all, before starting the vehicle, ensure that the tire pressure of the vehicle is normal and the length of the tie rod is adjusted. At the same time, check whether the ball of the lower arm is worn. If there is wear, it needs to be replaced. From time to time, it is necessary to check if the parts of each connection part are firm. Second, the rear axle of the garbage truck is also within the scope of frequent inspection of the fault. When the tire rotation is difficult after discovery, first check whether the rear wheel bearing is worn or it is the rear wheel bearing. The situation of lockup occurs. When this happens, professional maintenance personnel should be found to replace it for repair. Thirdly, it is also regular to check whether there is any abnormality in the oil path of the garbage truck and whether there is any oil spillage. When this happens, it needs to be repaired immediately to make oil leakage and seepage. Tighten the place, at the same time to check the size of the lubricant, to prevent dry burning, so as not to start the engine holding cylinder situation. Believe that you understand this, you should have a certain degree of help, when you understand these common faults mentioned above, when your garbage truck appears the above-mentioned failures, you can calmly deal with. In addition, when you use the garbage truck , you also need to pay more attention to maintenance, so as to be able to increase its service life. The use of garbage trucks can only maintain a certain degree of cleanliness for the life we ​​live in. To truly protect the environment, we need every one of us to work hard.
The High Shear Mixer Granulator is a high
efficiency equipment that can mix different powder materials and granulate granules in one procedure. It is
widely used for pharmaceutical industry, foodstuff industry and chemical industry, etc.
The machine can adopt horizontal barrel or cone structure , its structure is reasonable. The character of granule is uniform and the fluidization of granule is good , It provides ideal granule material to tablet pressing procedure .
High Shear Mixer Granulator High Speed Mixing Granulator,High Speed Mixing Granulating,High Shear Mixer Granulator Changzhou Jiafa Granulating Drying Equipment Co.,Ltd , http://www.jf-drying.com