Hanging bucket garbage truck maintenance matters

Many people always like to throw litter at random. This has caused great inconvenience to workers. Fortunately, there are now garbage trucks that have brought some help to their work. When using the garbage truck, the owner has to consider its maintenance issues because only good maintenance and repair can lengthen its service life. Therefore, detailed understanding of how to maintain and maintain the garbage truck It is very necessary, for you to make the following introduction.

Firstly, the use of the engine for the chassis of the hanging garbage truck must be strictly followed in accordance with the formal methods, and it should be implemented according to the instructions.

Secondly, if it is to purchase new ones, when the garbage truck is used again, it must be given enough time, a sufficient number of kilometeres, to run in. In addition, when writing something, it will not step on the gas pedal. Unloading

Thirdly, when the cylinder is working for a certain period of time, it is necessary to completely replace the working oil. First, you need to open the fuel tank, then put it into the screw plug, then inject new oil from the above oil hole, and then start the engine. After two trials have been confirmed, the system will start again.

Fourth, the high-pressure fuel pipe in the car should be replaced regularly. The cycle is generally changed every two years. However, if the pipe is found to be damaged and inflated in the process of use, it should be replaced in a timely manner. Also need to frequently check the hydraulic system for oil leakage, and timely replacement and maintenance.

Fifth, when the car is working every day, it needs to be washed in a timely manner. The cleaning site includes the entire vehicle and the carriage. It is also necessary to check the amount of oil regularly and regularly apply grease to various parts. The surface of each guide rail must also be painted. For the working pressure of the gear oil half, it is necessary to check and adjust it regularly. It is also necessary to check the filter element in the oil filter to remove impurities and replacement.

After reading the above introduction, you should already know something about the maintenance knowledge of the hanging garbage truck . For the car, the owner must love it. This will not only extend the service life, but also provide safety when used.

The rack roll forming machine includes one decoiler, servo feeder, hydraulic punching, roll forming and hydraulic cutting. The products of the rack roll forming machine are used as racks and shelves for supporting the daily commodities in supermarkets and shops.

1.Fast speed

2.Elegant appearance

3.PLC control, full automatic

4.Manufacture as buyer's requirements

Specifications:

Decoiler - Seven rollers leveling - Servo feeding - Power press - Material guiding - Main roll forming machine 

- PLC control system - Hydraulic cutting (45°) - Receiving table

Pictures for machine:

Training and Installation :
1. We offer installation service local in paid, reasonable charge. 
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation. 

Certification and after service:
1. Match the technology standard, ISO producing certification 
2. CE certification 
3. 12 months warranty since the delivery. Board. 

Our advantage:
1. Short delivery period. 
2. Effective communication 
3. Interface customized. 

Storage Upright Roll Forming Machine

Storage Upright Roll Forming Machine,Storage Racking Upright Roll Forming Machine,Lms Storage Upright Roll Forming Machine,Punchig Storage Upright Roll Forming Machine

YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn