2 tons of fire sprinklers have any common faults

Many consumers are usually buying a two-ton fire sprinkler in advance to find out what common faults and problems they have, so as to prevent them from happening, then the home will give you a detailed introduction about two tons of fire fighting. Sprinklers , what are the common faults, how to solve the problem after the failure.

Fault 1, his electronic parts, the motor part, after the fire engine connected to the power, start, when there is no reaction, this situation is generally he is not plugged in the power plug, power supply main line and the motor short circuit caused by the failure, Only need to re-plug the power plug at this time.

Fault 2, when the start is quite difficult, or completely unable to start, just started the moment, accompanied by abnormal sound, and this time you need to go under the overhaul, you can use a piece of wood to move the fan, if the wood When the blade is fluctuating, it can be determined that it is a malfunction caused by the damage of the capacitor.

Three faults, just start when found excessive noise, when this problem occurs, are generally motor bearing damage, this time you need to disassemble the motor to replace the bearing, of course, if the wear is serious. It needs to be repaired by welding.

Fault 4, when the motor is running normally, it is found that there is little water or no water. At this time, you should first check the water pump of the sprinkler to see if the sealing ring of the water pump is damaged. If it is damaged, it must be replaced. Of course, it must be replaced. Unplug the power plug.

So, the above mentioned is the common fault of the 2 ton fire sprinkler for you. I hope to help you. Here, I suggest that if the sprinkler fails during the driving, then do not be nervous to follow the detailed operation flow. Maintenance, if you really do not repair well, then also find a professional maintenance personnel to carry out maintenance.

The manipulator is the core of the automatic welding manchinery which is composed of kinds of welding rectifier, Hanging Welding Head, Welding Turning Rolls, Welding Positioner, welding fluid feed-in and recovery system and so on. It is a whole set of welding equipment that can be used for metal pressuer vessel and metal machinery. The autoization Welding Machinery is widely used in pressure vessel, refrigeration plant, power plant, wind tower generating equipment, aviation, metallurgy industry, engineering plant, watercraft manufacture, roller resurfacing welding, petrochemical industry and so on.

CZ22-7×7 Complete Equipment of Spherical Head Welding Center

Spherical automatic welding plane is a cross Welding Machine , a set of ESAB wire submerged arc welding system, a set of ESAB with submerged arc welding system, a set of double column welding positioner.

Spherical welding center equipment mainly by the operating machine, ESAB welding system; TV monitoring system; flux feed recovery system, electrical control system, up and down tracking system, with a very surfacing institutions, water cooling system and other components.

The main technical parameters

We can provide the whole set welding manchinery for worldwide customers with high quality and good service, which is designed, manufactured, installed by ourselves.

Welding Machinery

Welding Machinery,Saw Welding Machine,Automatic Welding Machine,Machinery For Welding Metal

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com