Magnetic core plays an important role in the whole motor. It is used to increase the magnetic flux of the inductance coil. Maximum conversion of electromagnetic power has been achieved.The motor iron core is usually made up of a stator and a rotor. The stator is usually used as a non rotating part, and the rotor is usually embedded in the stator's internal position.
1. If there is a drip at the product interface, if there is a drip, you need to continue to tighten the bolt, or strengthen the interface sealing disc.
2. Whether the flange is intact and crack free. If it is found that the flange has cracks, brittle fracture, etc., need to be replaced in time
3. Is the ball deformed seriously? If the rubber ball is severely deformed by stretching, it is necessary to add a limit device in time to ensure the normal use of the rubber joint.
4. Check the degree of aging of the colloid, you need to replace the aging product in time, so as to avoid danger.
Motor Stator Stamping,Stator Lamination Stamping,Stamping Electrical Motor Stators,Stator Stacks,Laminations Stamping
YUYAO YUANZHONG MOTOR PUNCHING CO.,LTD. , http://www.yuyaoyuanzhong.com