Mine fires are also called mine fires or underground fires. It refers to a location at the fire coal mine tunnel, face, chamber, goaf like. Ground fires that can affect and threaten downhole safety, also known as mine fires. The cause of mine fires can be divided into internal fires and external fires according to their heat sources. The internal fire is a fire caused by spontaneous combustion of coal. It often occurs in the coal mining area, stop mining line, fault, coal pillar and other coal mining areas, excavation in the top of the roof or in the old closed mining area. External fire refers to fire caused by external fire sources such as open flames, cable fires, arc sparks generated by electrical equipment, gas or coal dust explosions, and fire. Generally speaking, in medium and small coal mines with low electrification, most of the external fires are caused by the use of open flames or illegal blasting. In mines with high degree of mechanization and electrification, most of them are caused by poor management and maintenance of electromechanical equipment, improper operation and operation, equipment failure and other reasons. Moreover, as the degree of electrification of mines continues to increase, the proportion of external fires caused by electromechanical equipment also tends to increase. In the underground, smoking, heating, illegal shooting, electric welding and other reasons, caused by external fires, also occur from time to time. Most of the external fires are likely to occur in wellsite parking lots, electromechanical chambers, transportation and mining roadways, and other places where machinery and electrical equipment are concentrated, and the wind flow is relatively smooth. Such fires generally occur more suddenly and develop at a faster rate. A small source of fire, a little negligence, the fire may spread to a large extent. If it is found to be untimely, the treatment method is improper, or the action measures are not decisive, it will bring serious damage to the mine and even a tragic personal injury or death.
Introduction of mini pleat filter machine:
This machine is mainly used for making HEPA Air Filters.
Advantages of mini pleat filter machine:
1)PLC Controller to adjust the pleating height easily.
2)Higher Pleating Speed.
3)Advanced Hot Melt Glue Dispensing Machine.
Main Functions of mini pleat filter machine:
1)Pleating for Glass Fiber & PP Filter Media.
2)Each Gluing Nozzles can be adjusted easily.
3)Automatic Filter Media holder with braking device.
Filter Pleaer Machine,Rotary Pleater,Rotary Pleater,Mini Pleat Filter Machine ChangZhou FENGJU Machinery Equipment CO., LTD , https://www.nbfengjumachinery.com