High strength steel tie rod are steel structural members made of carbon structural steel and alloy steel, processed by machining, heat treatment and surface anti-corrosion treatment, supplemented by adjusting sleeves, lock and joints etc. The steel tie rod are important components of steel structures for construction of giant, large span buildings and ship docks. They are mainly used for prestressed parts and large span buildings in construction projects. While the strength of the product is improved, but the plasticity index is not reduced, which satisfies the principle of using the same amount of strength in the architectural design. The tie rods, tie bars, tension rods and tension bars steel grades are specified as grade 460, grade 520, grade 550, grade 650, grade 785, grade 830, grade 930, grade 1080 etc.
Steel Tie Rod,Stainless Steel Tie Rods,Structural Steel Tie Bars,High Strength Steel Tie Rod SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdcolddrawnsteelbar.com
Driving skills in icy and snowy weather Drivers drive on icy roads. Use snow chains. Must reduce the speed, to avoid rapid acceleration and emergency braking, rapid braking and sharp cornering at high speed is strictly prohibited, otherwise the car is prone to slipping and tailing phenomenon and cause accidents.
Stopping Technique When the car is stopped, the accelerator pedal should be relaxed to reduce the speed. Evenly step on the brake pedal. After the car stops, depress the clutch pedal to put the transmission into neutral, and pull the manual valve back to the end to make it in a braking state. Turn off the power (turn the start switch key back to the LOCK position). Avoid parked vehicles on steep slopes. If you have to park on the slope, you must use padding to fix the wheels. After driving, the exhaust pipe is in a high temperature state. Therefore, it is not allowed to park vehicles near inflammables such as withered grass. When naps in the car, the engine must be stopped. During a nap, accidents may occur due to touching the shift lever and pedals.
Fog Driving Skills Drivers driving fog tanks in fog should light fog lamps and drive at low speeds. Pay attention to the markings on the center line of the road and the taillights of vehicles driving ahead. If the fog is heavy, stop driving and park the car in a safe place. At the same time, turn on the distress alert switch so that both the front and rear left and right turn signals will flash at the same time.
Rainy days driving skills When the driver is driving on a rainy surface, he should control the speed. It is best not to exceed 35km/h. When driving in the rain, rainwater may enter the brake drum and affect the braking effect. Therefore, the brake pedal should be lightly pressed from time to time. Check the braking effect to avoid sudden braking and sharp turn, otherwise it is easy to cause slippage and cause accidents.
Chu Sheng Motor Co., Ltd. warmly reminds you to pay attention to traffic rules, driving safety, rain, snow and other roads should be running at a slow speed. You must not ignore life safety because of hurry. If you have any questions about consulting tanker driving skills or consulting tanker prices, you can contact our customer service directly.
Tankers should take appropriate measures under various weather conditions. The following details are for you: