Iron Casting Parts,3D Printed Sand Mold Strength,Sand Core 3D Printing Procedure,Metal 3D Printing Procedure Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl-3dprint.com
Mixer introduction
CH type mixer is widely used for mixing powder or wet raw materials and can make the main and auxiliary raw materials with different proportion uniform.
Groove mixer for mixing powder or paste material, so that the different quality of material mixed. Is a horizontal trough single paddle mixing, stirring paddle was shaking through the shaft, easy to clean. Contact with the object of the whole made of stainless steel, it has good corrosion resistance, mixing tank can automatically flip down to discharge the material.
Characteristics
The places where contact the raw materials are made of stainless steel.The gap between blades is small and there is no dead corner. At the ends of stirring shaft,there are seal devices.It can prevent from the raw material leakage.
Material to be dried
It is widely used for pharmaceutical,chemical,foodstuf f and so on industries
Technical Parameter
capacity(L)100
150
200
400
power of motor(kw)
2.2
3
3
5.5
speed of stirring(rpm)
24
24
24
24
inclined(×)
105
105
105
105
weight(kg)
350
500
650
1200
overall dimensions(mm)
1400×500×1000
1600×600×1100
1800×700×1200
2000×820×1460
The bulk density of material is made based on 0.6g/cm3, Please point out if it's over .
Model NO.: CH
Layout Type: Horizontal
Mixing Drum Shape: Disc
Additional Capabilities: Coating
Operating type: Cycle Operating
Condition: New
Name: Ribbon Mixer
Other Name: Trough Mixer
Material: Stainless Steel
Industry of Application: Checmial or Pharma Powder
Capacity: 100kg
Working Volume: 100L
Machine Structure: Trough Mixer
Mixing Time: 6-15minutes
Power: 5.5kw
Dry or Wet: Dry
Trademark: ck
Transport Package: Wooden Case
Specification: CE SGS SONCAP
Origin: China
HS Code: 8479820090