Nine strokes ensure longevity of vehicles The engine piston temperature is too high, easy to cause overheating and smelting and holding cylinder; rubber seals, triangle tape, tires and other overheating, premature aging, performance degradation, shorten the service life; engine, generators, regulators and other electrical equipment The coil is overheated, easily burned and scrapped. Many car owners are very cautious about choosing accessories, but it is easy to neglect the maintenance of the accessories after installation. In this way, the car accessories are very susceptible to wear and the life span is reduced when the car journey is gradually increased. The following provides you with nine major parts care precautions, only for the owner reference.

One of the "longevity" tips: avoiding heat

The engine piston temperature is too high, easy to cause overheating and smelting and holding cylinder; rubber seals, triangle tape, tires and other overheating, premature aging, performance degradation, shorten the service life; engine, generators, regulators and other electrical equipment The coil is overheated, easily burned and scrapped.

"Longevity" 诀 二: Avoid dirt

Parts such as fuel filters, oil filters, air filters, hydraulic oil filters, and various types of filters can result in poor filtration. Water tank fins, air-cooled engine blocks, cylinder head fins, cooler radiating fins, and other parts that are too dirty can cause poor heat dissipation and high temperatures.

"Longevity" 诀 诀 :: Avoidance

The cylinder pad of the engine can not be mounted reversely during installation, otherwise it will lead to premature ablation and damage of the cylinder pad; when the engine fan blade is installed, it can not be reversed; for the pattern-patterned tire, the herringbone pattern tire, after installation, should be made Chirp point to the back.

"Longevity" 诀 诀 : :: 避 避

Engine valve locks should be installed in pairs. Missing or missing valves will result in loss of control of valves and damage to the pistons; etc.; engine connecting rod bolts, flywheel bolts, cotter bolts mounted on driveshaft bolts, locking screws, and rupture discs. Spring washers and other anti-loosening devices, once they are installed, may cause serious problems during use.

"Longevity" 诀 五 : :: Oil

If the engine dry air filter paper filter is wetted with oil, it will easily draw a higher concentration of air into the cylinder, causing insufficient air, increased fuel consumption, and reduced engine power; if the triangular tape is wetted with oil, The corrosion aging will be accelerated; the brake shoes, the friction plates of the dry clutch, and the brake belt will be exposed to oil, which will threaten the driving safety.

"Longevity" 诀 六: Avoid wash

For the paper air filter of the engine, it cannot be cleaned with any kind of oil; for the leather parts, it is also not suitable for cleaning with oil.

"Longevity" 诀 seven: avoid pressure

If the tire casing is stored for a long time and is not turned in time, it will be deformed due to extrusion; the air filter and the paper filter of the fuel filter, if squeezed, cannot reliably play the role of filtration; Rubber seals, triangle tapes, tubing, etc. cannot be squeezed.

"Longevity" 诀 Eight: Avoiding Fire

Rubber products such as tires, triangle tapes, cylinder liners, rubber seals, etc., which are close to the source of fire, will easily deteriorate, deteriorate, or be damaged. On the other hand, they may cause fire accidents.

"Longevity" 诀 : : : : : :

Some parts are supposed to be used once, and individual drivers or repairmen are repeatedly used to save or because they do not understand the taboos. This can easily lead to accidents.

Machining Titanium

In the process of machining titanium alloy, the titanium alloy material itself has low modulus of elasticity, large elastic deformation, high cutting temperature, low thermal conductivity and high chemical activity at high temperature, which makes the sticky knife phenomenon serious, easily aggravating the tool wear and even breakage, which leads to the poor machinability of the titanium alloy. Therefore, machining titanium alloy requires proper cutting tools and good machining technology.

Machining Titanium,Titanium Machining Parts,Titanium Cnc Turning Machining Parts

Hong Kong RYH CO., LTD , https://www.szcncmachining.com

Posted on