With the widespread use of high temperature test chambers, more and more users are purchased, but proper use can make the data of the equipment accurate and the equipment can prolong its service life. Next, Shanghai Bao test instrument Zhugong will give you the correct use of high temperature test chambers, hope to help users better understand and apply the product. 1. When you buy the equipment home, you should place it in a well-grounded room with a ventilated place. Do not place flammable, explosive or corrosive substances around the equipment. 2. Before using the vacuum drying test chamber, find the relevant personnel to debug the equipment first. After the debugging is completed, you can start using it, and then turn on the power of the vacuum box. At this time, the power indicator lights up to control the power meter. The PV screen will display the temperature measured in the working room. The SV screen will display the temperature set at the factory. 3. If you change the set temperature, you should press and hold the function key PV panel of the temperature controller to display the SP character. You can use the button to change the set temperature. Press the SET button again to make the PV screen display the studio temperature, and the SV screen will display the new set temperature. When the meter AT and HEAT lights are on, it indicates that the meter has entered the warming state again. 4. When the indoor temperature of the vacuum drying test chamber is close to the set temperature, the HEAT lamp will be bright and dim, indicating that the heating enters the stage of PID adjustment. The meter sometimes measures the temperature and exceeds the set temperature, sometimes lower than the setting. This is a normal phenomenon. When the measured temperature is close to or equal to the set temperature, it takes one or two hours for the studio to enter the constant temperature state before the item can enter the drying stage. 5. If the required temperature is low, you can use the secondary setting mode. If the required working temperature is 80 °C, the first time you can set 70 °C first, and then the temperature overshoot starts to fall back and then the second time. Set 80 ° C, which can reduce the overshoot of the temperature and let the product enter a constant temperature as soon as possible. 6. When the product is dry, turn off the power. If you need to accelerate the temperature drop, open the air release valve to make the vacuum level 0. Wait for about 5 minutes and then open the door. 7. If the humidity of the dry matter in the working room is relatively large, the generated water vapor will directly affect the performance of the vacuum pump. Therefore, it is recommended to insert a filter between the drying box and the vacuum pump. If an inert gas such as nitrogen is required during the drying of the article, it should be stated in the contract that an intake valve needs to be added. Sand Making Machine used to produce artificial sand & plaster sand; sand manufactured by crushing,The sand making machine is specially designed for manufacturing artificial sand from the grit. It is a better utilization of the large size of rock materials and stones through rock on rock metal machine mechanism roughly as follows- Sand Making Machine,Sand Making Equipment,Sand Crusher Machine,Sand Crusher Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrusher.com
Sand and gravel aggregate play an important role in making up building materials like concrete, which makes the separation and screening process extremely necessary.
Sand making production line is also called sand and stone production line. And the sand production line is a kind of special equipment for producing construction sand and stone. The sand making machine for sale is often needed in many fields, and this processing line can meet the requirements of simultaneous production of stone and artificial sand.
The sand manufacturing plant can crush rock, sand, gravel and other materials into various size in accord with the requirement of construction sand. Sand made by sand production line has uniform size and high compression strength, and this kind of sand is much more in line with the construction requirements than the sand processed by the ordinary hammer sand crusher machine.
Three Systems of Sand Plant Equipment:
sand plant mainly has three systems. Here is their basic information:
Firstly, the feeding system. The system send raw material to sand crusher and sand screening machine. According to crush and screen process, feeding equipment includes vibrating feeder and other types of feeding machines.
Secondly, the crushing system. The system is the heart of the whole set of sand processing equipment. The work of sand crushing plant system is to crush different varieties of ore raw materials into the required size of the finished product. A complete stone production line includes many crushers. These crushing machines have different functions, and complete the crushing operation together.
Thirdly, the screening and transporting system. The system screens the ore which are crushed by crushing machinery. In the compound sand and stone production line, sand and stone need to be separated, and the separated material needs to be transported to the respective site. The sand screening equipment used in this process is generally a Linear Vibrating Screen or other sand sieve machine.