Spray Dryer Equipment:
The spray dryer is widely used in chemical, food, pharmaceutical industries. It can convert the liquid, suspension, emulsion into powder product. It can keep the product color, flavor and quality. The heat source can be electric, steam, natural gas, coal and diesel.
Spray Dryer Spray Drying Equipment, Spray Dry Machine, Mini Spray Dryer, Atomizer Spray Dryer Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com
Content
No.
Production Line
Quantity
1
Mixing Machine
1 set
2
Drying hopper
1 set
3-1
ABS PLA PVC single screw extruder
1 set
3-2
Bush die
1 set
4
Water channel
1 set
5
Wire storage supportÂ
1 set
6
Traction machine
1 set
7
Infrared ray diameter gauging device
1 set
8
Winding machine
1 set
9
Single coil forming machine
1 set
Main Technical Parameter
1.0 Name: Drying hopper
Volume: 60L
Output: 50kg/h
Heating power: 10kw
Characteristics: protect the fan and electric heating tube. Famous brand electric elements and stable performance. Materials of the heating tube: 304 stainless steel without pollution and long service life. The sealing rings adopt the insulation silicone rubber.
Â
2.0 Name: Single screw extruder (TD-LSJ50)
Screw:
--Diameter: Φ50mm;
--L/D=25:1
--Screw material: 38CrMoAlA
--Surface treatment of screw: hard chromium plating treatment; thickness of chromium coating: 0.5-0.6mm; hardness: HRC65
--Compression ratio: C/R=3.0 BM screw
--Range of rotating speed: 10~80rpm
--The design of screw is applicable to special rollers of ABS PLA PA plastic.
--Treatment of internal and external surfaces of rollers.
--Heater: the stainless steel heaterwith the internal surface receiving polished finish and the external surface of stainless steel.
--The heating section and power: 3 heating sections, 1.8kw/section
--Cooling of the roller: air cooling of high efficiency and low noise.
--Cooling section and power: 3 cooling section. 120w/section.
Reduction box:
--hard tooth surface reduction box with spiral speed reduction transmission.
--ZLYJ173 hard tooth surface helical tooth cylindrical gear reduction box, selection of 20CrMn Materials, malcomising the tooth surface receives gear-grinding machiing with the noise lower than 75Db and centrifugal lubrication of machining oil.
--bearing brand: Japan "NSK"
3.0 Name: Driving motor:
--AC "TECO" frequency converter, "Wannan" motor.
4.0 Name: Water channel (hot water channel and cold water channel)
--Water channel specification: 304 stainless steel material, the thickness of stainless steel 2.0mm.
--Circulating water device: 1 set of centrifugal pump with motor power 1.1kw, circulating water channel: 304 stainlees steel material, may be connected with the cooling device.
--Water inlet pipe: "1/2" with stainless steel stop valve.
--Water outlet pipe: "1/2" with stainless steel stop valve.
5.0 Name: Horizontal wire storage support
--The length of wire storage support is 4.5m.
--The gear motor of 0.75kw drives the magnetic power clutch to control the linkage of tension and wire-rewinding machine.
--The winding speed is adjusted according to the length of stored wire and the largest length of stored wire is 80m.
--The plastic wheel for wire storage >Φ120mm, wheel number 9+9, the wire storage wheel and shaft are installed with bearing to reduce the resistance.
--The part of chain transmission is installed with safety protections.
6.0 Name: Traction machine
--Power: 0.4kw.
--2 polyurethane wheels are assembled through pressure spring and sliding device.
--Type of running 20: Φ120mm.
7.0 Name: Infrared ray diameter gauging device
--Diameter measuring scope: 0.1~15mm.
--Accuracy: +/- 0.05μm.
--Measuring speed: 2*1200s/second.
--The diameter measured can be displayed at the operation panel of the mainframe for the convenience of adjusting the speed of extruding machine or traction to ensure product diameter.
--Able to test transparent and circular products.
--Able to test the data of every surface of plastic wire comprehensively in a three-dimensional manner.
8.0 Name: Winding machine
--Type: dual-shaft shallow shaft winding machine (the size of winding coil should be provided).
--Power: 2.5kw/4P, "TECO" frequency converting control.
--Flexible flat cable: Φ20 bar gathering stand.
--"YAN MING" meter counter may set the forecast time and predicted output. The meter counter will alarm automatically when the predicted output is reached.
--Applicable wire shaft: according to the requirement of customer's company.
Â
TENDA, headquartered in Nanjing, China, is a global manufacturing and trading company in the field of high performance plastics and rubber processing equipment, extrusion solutions, masterbatch and compounding, etc. Its unit Nanjing Tengda Machinery Co.,Ltd is a professional manufacturer of twin screw extruder,
Our machine is firstly painted with anticorrosive oil, and then wrapped in the plastic film before it is finally packed in the wooden case or container.
Packing: wooden case for export, fit for multiple handing and long distance marine shipping.
Production timw: within 45 work days.
Â
Content
No.
Production Line
Quantity
1
Mixing machine
1 set
2
Drying hopper
1 set
3-1
ABS PLA PVC single screw extruder
1 set
3-2
Bush die
1 set
4
Water channel
1 set
5
Wire storage supportÂ
1 set
6
Traction machine
1 set
7
Infrared ray diameter gauging device
1 set
8
Winding machine
1 set
9
Single coil forming machine
1 set
Main Technical Parameter
1.0 Name: Drying hopper
Volume: 60L
Output: 50kg/h
Heating power: 10kw
Characteristics: protect the fan and electric heating tube. Famous brand electric elements and stable performance. Materials of the heating tube: 304 stainless steel without pollution and long service life. The sealing rings adopt the insulation silicone rubber.
Â
2.0 Name: Single screw extruder (TD-LSJ50)
Screw:
--Diameter: Φ50mm;
--L/D=25:1
--Screw material: 38CrMoAlA
--Surface treatment of screw: hard chromium plating treatment; thickness of chromium coating: 0.5-0.6mm; hardness: HRC65
--Compression ratio: C/R=3.0 BM screw
--Range of rotating speed: 10~80rpm
--The design of screw is applicable to special rollers of ABS PLA PA plastic.
--Treatment of internal and external surfaces of rollers.
--Heater: the stainless steel heaterwith the internal surface receiving polished finish and the external surface of stainless steel.
--The heating section and power: 3 heating sections, 1.8kw/section
--Cooling of the roller: air cooling of high efficiency and low noise.
--Cooling section and power: 3 cooling section. 120w/section.
Reduction box:
--hard tooth surface reduction box with spiral speed reduction transmission.
--ZLYJ173 hard tooth surface helical tooth cylindrical gear reduction box, selection of 20CrMn Materials, malcomising the tooth surface receives gear-grinding machiing with the noise lower than 75Db and centrifugal lubrication of machining oil.
--bearing brand: Japan "NSK"
3.0 Name: Driving motor:
--AC "TECO" frequency converter, "Wannan" motor.
4.0 Name: Water channel (hot water channel and cold water channel)
--Water channel specification: 304 stainless steel material, the thickness of stainless steel 2.0mm.
--Circulating water device: 1 set of centrifugal pump with motor power 1.1kw, circulating water channel: 304 stainlees steel material, may be connected with the cooling device.
--Water inlet pipe: "1/2" with stainless steel stop valve.
--Water outlet pipe: "1/2" with stainless steel stop valve.
5.0 Name: Horizontal wire storage support
--The length of wire storage support is 4.5m.
--The gear motor of 0.75kw drives the magnetic power clutch to control the linkage of tension and wire-rewinding machine.
--The winding speed is adjusted according to the length of stored wire and the largest length of stored wire is 80m.
--The plastic wheel for wire storage >Φ120mm, wheel number 9+9, the wire storage wheel and shaft are installed with bearing to reduce the resistance.
--The part of chain transmission is installed with safety protections.
6.0 Name: Traction machine
--Power: 0.4kw.
--2 polyurethane wheels are assembled through pressure spring and sliding device.
--Type of running 20: Φ120mm.
7.0 Name: Infrared ray diameter gauging device
--Diameter measuring scope: 0.1~15mm.
--Accuracy: +/- 0.05μm.
--Measuring speed: 2*1200s/second.
--The diameter measured can be displayed at the operation panel of the mainframe for the convenience of adjusting the speed of extruding machine or traction to ensure product diameter.
--Able to test transparent and circular products.
--Able to test the data of every surface of plastic wire comprehensively in a three-dimensional manner.
8.0 Name: Winding machine
--Type: dual-shaft shallow shaft winding machine (the size of winding coil should be provided).
--Power: 2.5kw/4P, "TECO" frequency converting control.
--Flexible flat cable: Φ20 bar gathering stand.
--"YAN MING" meter counter may set the forecast time and predicted output. The meter counter will alarm automatically when the predicted output is reached.
--Applicable wire shaft: according to the requirement of customer's company.
Â
TENDA, headquartered in Nanjing, China, is a global manufacturing and trading company in the field of high performance plastics and rubber processing equipment, extrusion solutions, masterbatch and compounding, etc. Its unit Nanjing Tengda Machinery Co.,Ltd is a professional manufacturer of twin screw extruder,
Our machine is firstly painted with anticorrosive oil, and then wrapped in the plastic film before it is finally packed in the wooden case or container.
Packing: wooden case for export, fit for multiple handing and long distance marine shipping.
Production timw: within 45 work days.
Â
The spray drying is the widest used technology in the liquid shaping technology and in the drying industry. It is most suitable for producing powder, particle, or block solid products from materials of solution, emulsion, soliquid and pumpable paste states. Therefore, when the particle size and distribution of the final products, their residual water contents, the stocking density and the particle shape meet the precision standards, the spray drying is one of the most desired technologies.
Spray dryer features
1, High speed of drying. After the spraying of he material liquid, the surface area of the material will be increased greatly. In the hot-air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.
2, It is especially suitable for drying the heat sensitive materials. It`s final products own the good uniformity, mobility, dissolving capacity. And the final products are high in purity and good in quality.
3, The production procedure is simple and the operational control is easy. The liquid with the moisture contents 40-60%(for special materials, the contents may reach 90%) can be dried into power or particle products once a time. After the drying, there is no need for smashing of sorting, so as to reduce the operation procedures in the production and enhance the purity. The product particle diameter, looseness and water contents can be adjusted through changing the operation condition in a certain scope.
Model NO.: TD-LSJ50
Engagement System: Non-Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Item Name: 3D Filament Extruding Machine
Screw Diameter: 50mm
L/D: 25/28
Raw Material: ABS PLA PVC Plastic Pellet
Capacity: 15-30kg/H
Material: 38crmoala
Voltage: 380V/50Hz 3 Phrase(Customized)
Inner Diameter: 32mm; 55mm
Diameter of Filament: 1.5-3mm
Production Time: 45 Work Days
Trademark: TENDA
Transport Package: Wooden Case or Container
Specification: 28000*2200*2200mm
Origin: Nanjing, China
HS Code: 8477209000
Model NO.: TD-LSJ50
Engagement System: Non-Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Item Name: 3D Filament Extruding Machine
Screw Diameter: 50mm
L/D: 25/28
Raw Material: ABS PLA PVC Plastic Pellet
Capacity: 15-30kg/H
Material: 38crmoala
Voltage: 380V/50Hz 3 Phrase(Customized)
Inner Diameter: 32mm; 55mm
Diameter of Filament: 1.5-3mm
Production Time: 45 Work Days
Trademark: TENDA
Transport Package: Wooden Case or Container
Specification: 28000*2200*2200mm
Origin: Nanjing, China
HS Code: 8477209000
3D Printer Plastic Filament Extruder Machine Price
3D Printer Plastic Filament Extruder Machine Price