Qingdao SUBA CNC Technology Co., Ltd , https://www.cncrouter-china.com
 
(1). Autoclaved Aerated AAC Block Brick Machine Advantages
1. light weight
Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay block and 1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
2. Good heat preservationÂ
With a large number of pores inside, AAC has good heat preservation. Normally, AAC blocks with thickness of 200mm can preserve heat as well as those common solid clay blocks with thickness of 490mm.
3 Good fire resistance without releasing harmful gas
Main materials for AAC are inorganic. It has features of keeping temperature, resisting fire and releasing no harmful gas. With good heat preservation to the steels, buildings made of AAC bricks can only be destroyed by surface when they are on fire.  
(2). Cutting Machine Simple Introduction
The aac block brick machine cutting machine is developed based on the traditional cutting machine. It mainly refers to the WIHA technology. Its reducer and control elements are of domestic or international well-known brands, thus ensuring the stability of the machine.
Features:Â
1). The aac block brick cutting machine utilizes the cylinder to tension the steel wire.Coupled with the frame swinging, the service life of the steel wire is greatly prolonged, and the product accuracy has been greatly improved as well.
2). With the mobile cutting table, the green brick placing and cross-cutting are accomplished at the same position. When the adobe moves downward to the next position, both vertical and horizontal cutting can be completed.
3). As the new chain-type cutting machine, it features high automation, convenient operation, accurate cutting, and short cutting period. With this machine, the production cycle will be greatly shortened and the labor productivity will be significantly improved. 
(3).Hydraulic Mould Crane
  This hydraulic mould crane is the main corollary equipment in the aerated concrete production. It allows the bricks together with the mould to be placed on the concrete cutting machine for die sinking or demolding. The bricks will be cut by the concrete cutting machine. Meanwhile, the hydraulic mould crane will recombine and clean the concrete mould, bottom plate. Then, it will brush the stripping oil for re-pouring.
(4). Slurry Making Machine
With the slurry making machine, you can crush and mix the coal ash into the paste type after you have added water.
 
(5).Autoclaved Aerated AAC Block Brick Macine Raw material proportion (sand and fly ash)Â
Â
Â
Name
Unit
Cement lime fly ash
flash
%
65-70
cement
%
6-15
lime
%
18-25
gypsum
%
3-5
Aluminum powder paste(600kg/m3)
1/10000
8
Water & material rate
Â
0.60-0.65
Casting system
OC
36-40
Aluminum mixing time
S
30-40
Name
Unit
Cement lime sand
Sand
%
55-65
Cement
%
10-20
Lime
%
20-30
Gypsum
%
2-3
Aluminum powder paste(600kg/m3)
1/10000
8
Water& material rate
Â
0.65-0.75
Casting system
OC
35-38
Aluminum mixing time
S
30-40
(6).Other Corollary Equipment
Autoclave for AAC Block Brick Machine
Material storage silo
Cement silo
 
Â
Â
Please contact us to get more information about the AAC block machine production line.↓↓↓
Â
Flow Chart Of Autoclaved Aerated (AAC) Block Brick Machine Production line
Â
(1). Autoclaved Aerated AAC Block Brick Machine Advantages
1. light weight
Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay block and 1/5 common concrete.So use the Light block can reduce the weight of the build more,and also reduce the beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
2. Good heat preservationÂ
With a large number of pores inside, AAC has good heat preservation. Normally, AAC blocks with thickness of 200mm can preserve heat as well as those common solid clay blocks with thickness of 490mm.
3 Good fire resistance without releasing harmful gas
Main materials for AAC are inorganic. It has features of keeping temperature, resisting fire and releasing no harmful gas. With good heat preservation to the steels, buildings made of AAC bricks can only be destroyed by surface when they are on fire. Â
(2). Cutting Machine Simple Introduction
The aac block brick machine cutting machine is developed based on the traditional cutting machine. It mainly refers to the WIHA technology. Its reducer and control elements are of domestic or international well-known brands, thus ensuring the stability of the machine.
Features:Â
1). The aac block brick cutting machine utilizes the cylinder to tension the steel wire.Coupled with the frame swinging, the service life of the steel wire is greatly prolonged, and the product accuracy has been greatly improved as well.
2). With the mobile cutting table, the green brick placing and cross-cutting are accomplished at the same position. When the adobe moves downward to the next position, both vertical and horizontal cutting can be completed.
3). As the new chain-type cutting machine, it features high automation, convenient operation, accurate cutting, and short cutting period. With this machine, the production cycle will be greatly shortened and the labor productivity will be significantly improved.Â
(3).Hydraulic Mould Crane
  This hydraulic mould crane is the main corollary equipment in the aerated concrete production. It allows the bricks together with the mould to be placed on the concrete cutting machine for die sinking or demolding. The bricks will be cut by the concrete cutting machine. Meanwhile, the hydraulic mould crane will recombine and clean the concrete mould, bottom plate. Then, it will brush the stripping oil for re-pouring.
(4). Slurry Making Machine
With the slurry making machine, you can crush and mix the coal ash into the paste type after you have added water.
Â
(5).Autoclaved Aerated AAC Block Brick Macine Raw material proportion (sand and fly ash)Â
Â
Â
Name
Unit
Cement lime fly ash
flash
%
65-70
cement
%
6-15
lime
%
18-25
gypsum
%
3-5
Aluminum powder paste(600kg/m3)
1/10000
8
Water & material rate
Â
0.60-0.65
Casting system
OC
36-40
Aluminum mixing time
S
30-40
Name
Unit
Cement lime sand
Sand
%
55-65
Cement
%
10-20
Lime
%
20-30
Gypsum
%
2-3
Aluminum powder paste(600kg/m3)
1/10000
8
Water& material rate
Â
0.65-0.75
Casting system
OC
35-38
Aluminum mixing time
S
30-40
(6).Other Corollary Equipment
Autoclave for AAC Block Brick Machine
Material storage silo
Cement silo
Â
Â
Â
Please contact us to get more information about the AAC block machine production line.↓↓↓
Â
Model NO.: AAC production line
One Mould Product: 2.88 M3
Machine Type: AAC Block Brick Machine
Raw Material: Sand/Cement/Fly Ash/Lime/Alumin
Block Capacity: 50000cbm-300000cbm Per Year
Technology: Germany Technology
Mixer Model: Slurry Mixer
Trademark: Tengfei
Transport Package: Container
Specification: 1000cbm
Origin: Shandong Province, China
HS Code: 8474809090
Model NO.: AAC production line
One Mould Product: 2.88 M3
Machine Type: AAC Block Brick Machine
Raw Material: Sand/Cement/Fly Ash/Lime/Alumin
Block Capacity: 50000cbm-300000cbm Per Year
Technology: Germany Technology
Mixer Model: Slurry Mixer
Trademark: Tengfei
Transport Package: Container
Specification: 1000cbm
Origin: Shandong Province, China
HS Code: 8474809090
Flow Chart Of Autoclaved Aerated (AAC) Block Brick Machine Production line